Commercial Washer

High-performance kitchen appliance service

$59.99 service call

  • Not draining properly
  • Washer not spinning
  • Water leaking from machine
  • Excessive vibration or noise
  • Not turning on or powering up
  • Top 5 problems with the Commercial Washer

    Signs. Likely Causes. Solution.

    Signs: No lights or response after pressing start.
    Likely Causes: Faulty door lock, blown fuse, defective start switch, or control board failure.
    Solution: Check power connection, test door latch and switches, inspect control panel and circuit board.

    Signs: Water remains in the drum after the cycle ends.
    Likely Causes: Clogged drain pump, blocked drain hose, or malfunctioning pump motor.
    Solution: Clear drain filters and hoses, test and replace drain pump if necessary.

    Signs: Clothes remain wet, drum doesn’t rotate or spins unevenly.
    Likely Causes: Broken drive belt, worn motor, faulty speed sensor, or unbalanced load.
    Solution: Replace belt, test motor and control module, redistribute load properly.

    Signs: Puddles under or around the washer during or after operation.
    Likely Causes: Worn door seal (front-load), cracked hoses, loose connections, or faulty water inlet valve.
    Solution: Replace damaged gaskets or hoses, tighten connections, and test inlet valves.

    Signs: Loud banging, shaking, or movement during spin cycle.
    Likely Causes: Unlevel machine, worn suspension springs or shock absorbers, overloaded drum.
    Solution: Level the washer, inspect and replace suspension parts, avoid overloading.

    create_a_realistic_image_of_commercial_washing_machines_located_inside_a_laundromat_for_adults_45_d_6mgfynswi6s15vcj0v4s_2

    Additional Common Commercial Washer Issues

    create_a_realistic_image_of_commercial_washing_machines_located_inside_a_laundromat_for_adults_45_d_ughzd0l8b58ruvqaqgep_3

    Signs: Too much or too little water compared to normal cycles.
    Likely Causes: Faulty water level sensor or pressure switch.
    Solution: Test sensor with a multimeter and replace if needed.

    Signs: Door remains locked after cycle or refuses to unlock.
    Likely Causes: Malfunctioning door lock mechanism or faulty control board.
    Solution: Manually release the lock (if accessible), test and replace latch or board.

    Signs: No input when buttons are pressed, blank screen.
    Likely Causes: Control board failure, damaged wiring, or power surge.
    Solution: Reset unit if possible, inspect wiring, and replace control board.

    Signs: Detergent or softener remains in drawer after cycle.
    Likely Causes: Blocked dispenser tray, water valve failure, or control issue.
    Solution: Clean drawer and housing, test inlet valves, and check timer/control settings.

    Signs: Electrical or rubber burning odor mid-cycle.
    Likely Causes: Worn drive motor, slipping belt, or electrical short.
    Solution: Shut off power immediately, inspect motor and belts, and check wiring for signs of overheating.

    Commercial Washer

    Commercial Washer in San Diego County

    Need reliable Commercial Washer? Marshall Appliance is your local expert in San Diego County. We service restaurants, cafés, bakeries, and production kitchens with 5 years of experience, honest diagnostics, and manufacturer‑approved parts. Call (619) 342-8320 or email appliancerepairmarshall@gmail.com. We’re available 7 days a week with same‑day or next‑day appointments when available.

    ✨ Why Choose Marshall Appliance

    • 📦 ✅ Factory‑trained techs · Fully stocked vans
    • 🔌 ⚡ Up‑front estimates · No surprises
    • ❄️ 🕒 Same‑day or next‑day service (when available)
    • 🔥 🔧 Warranty on parts & labor
    • ⚙️ 🔒 Respect for your home or business (shoe covers, clean workspace)
    • 📦 📍 Local San Diego County team you can reach by phone or email 📞✉️

    Types of Commercial Washer We Service

    • Heavy‑duty commercial models for continuous service
    • High‑capacity, high‑BTU, or high‑volume configurations
    • Gas, electric, or dual‑fuel (where applicable)
    • Countertop, floor, and rack systems
    • NSF/health‑code compliant equipment

    ⚠️ Common Problems & Causes

    • 🚫 • Unit won’t start or randomly shuts off
    • 💧 • Inaccurate temperature or won’t heat/cool properly
    • 🔊 • Leaking during fill/spin or standing water in tub
    • ⚡ • Unusual noises, rattling, or vibration
    • 🔥 • Burning smell or tripping breakers
    • ❌ • Error codes or flashing lights

    🛠️ Our Repair Process

    1. 📞 You contact us with the model, brief symptoms, and your location.
    2. 📅 We schedule a convenient arrival window (7 days/week).
    3. 🔎 Certified tech arrives, performs diagnostics, and provides a written estimate.
    4. 🛠️ With approval, we complete most repairs on the first visit; if a special part is needed, we expedite it.
    5. 🧹 We test thoroughly, clean the work area, and review maintenance tips to extend equipment life.
    6. 📄 You receive a receipt and warranty information. Questions later? Just call or email us.

    Commercial Washer Troubleshooting Guide

    IssuePossible CauseTypical Repair TimeEstimated Cost Range
    Won’t start during rushHigh‑use wear, safety interlocks, power phase1–2 hours$180–$440
    Inconsistent temperatureThermostat, relays, gas valves, sensors1.5–3 hours$190–$480
    Slow recovery timeScaled components, blocked airflow, weak burners2–3 hours$220–$490
    Leaks or spillsDrain lines, gaskets, fittings1–2.5 hours$190–$420
    Tripping breakersShorts, overloading, bad contactors1–2 hours$200–$480
    Alarm / error codesBoard faults, sensors, comms1–2 hours$180–$420

    Brands we service: Amana, Bosch, Dacor, DCS, Electrolux, Frigidaire, GE, Jenn-Air, Kenmore, KitchenAid, LG, Liebherr, Magic Chef, Maytag, Miele, Samsung, Sharp, Speed Queen, Sub-Zero, Thermador, Thor, U-Line, Viking, Whirlpool, Wolf.

    🔗 Related Services

    📞 Contact Us

    Ready to book? Call (619) 342-8320 or email appliancerepairmarshall@gmail.com. We’re available 7 days/week across San Diego County.

    🌟 At Marshall Appliance, we go beyond simple fixes. Our technicians share maintenance tips, energy‑saving advice, and guidance on extending the life of your appliance. Serving all of San Diego County, we proudly help households and businesses reduce downtime and enjoy reliable performance every day. Our repeat customers in Oceanside, Carlsbad, Vista, and across the county know they can trust us for honest, long‑lasting repairs.

    create_highly_realistic_images_showcasing_the_appliance_repair_process_in_san_diego_in_each_image-_o_a2152862-c392-44f8-b391-bd51ff180635

    You may also like

    Christopher V., El Cajon, CA
    Christopher V., El Cajon, CA
    The technician was knowledgeable, polite, and solved the commercial washer issue faster than expected. Will call again.
    Ashley M., Chula Vista, CA
    Ashley M., Chula Vista, CA
    Very impressed—Marshall Appliance saved us from replacing our commercial washer. Affordable and efficient repair.
    Matthew B., National City, CA
    Matthew B., National City, CA
    Marshall Appliance came out the same day and fixed our commercial washer quickly—very professional and fair pricing.

    How to Contact Us

    Proudly serving the San Diego area with reliable appliance repair and maintenance services for both residential and commercial clients.

    Phone number:
    Address

    5142 Catocin Drive San Diego, CA 92115 United States

    Email:
    Hours

    Mon. – Sun.: 8:00 AM-10:00 PM

    Request Form

    Book Your Appliance Repair in 3 Easy Steps